- 80% with pre-saturated wipes
Pre-saturated solvent wipes : more than just a passing fashion.

Before they became known to the general public and met with popular success, pre-saturated solvent wipes had appeared in industry and were used for their tremendous capacity to reduce VOCs.

Used mainly in critical environments, prior to sticking and painting, the pre-saturated solvent wipe is the tool necessary, not only to increase productivity, but above all to reduce defects, and therefore production costs.Used in the aeronautical and automotive industries, they satisfy the most difficult requirements and are AMS, BMS, DMS approved.

Because for some applications using a solvent is unavoidable, reduce your VOC emissions by 80 % with the pre-saturated wipes, Prosat or Satwipes.Calculate the costs and stop using recycled rags, the over consumption of a basic procedure has never been a guarantee of efficiency and quality.

More about pre-saturated wipes
specifications

Contec by Socomor : trial of wipes saturated with solvents ( format ppt - 1667 Ko)

Dry wipes : reduction of VOC emissions - 30%

Although pre-saturation of solvent on wipes allows important quantitativegains in the reduction of VOC emissions and the reduction of waste for agiven operation, another possibility is to use the NON WOVEN technique forcleaning and manual wiping operations.

Because a basic and badly adapted support which is used in large quantitiesis not a guarantee of economy and quality, Socomor has developed a nonwoven range that provides a support which is specifically designed for eachoperation.

Surface preparation with pre-saturated wipes or dry wipes , cleaning /wiping in critical environments, preparation prior to painting or sticking; these operations should be rethought and optimised, in order to benefitfrom the total possible added value.

Non wovens are a technical and economic reality. Integrate them into yourquality and environmental policy.